legacycentral bbs

Posted: Fri Jun 03, 2005 6:30 am Post subject: --------------------------------------------------------------------------- Hey josh thanks for the quick response. I meant lightened flywheel dont know why I said aluminum. so all I need is a 2.5 RS clutch kit and flywheel? Would that be compatible wit...

HI guys. I need to know which aluminum flywheel/clutch/pressure plate will work with my cable actuated FWD 5mt. I would also like to install a LSD too. Thanks.

Posted: Fri Jun 03, 2005 6:30 am Post subject: -------------------------------------------------------------------------------- i had to use a fwd clutch becasue of the difference in the pull type and the push type and i had to switch to a cable clutch I want to do the same thing but was wondering i...

I want to rebuild my turbo 2.2 and im trying to save some money, so custom forged pistons are my second option. does anyone know if subaru sells oversize pistons to fit a bored over turbo block?

Thanks josh.

HA! got you to read my post. :P But seriously folks i need to know if the head bolts can be reused on a legacy turbo. Yes, ive searched and there seems to be a group that thinks you should and a group that says you shouldnt. What does the factory manual say? Im about to assemble my engine and im stu...

Ive heard from a couple of sources that the injector tops are pink for the turbo EJ22. Can someone please confirm this? the reason i ask is because
my tops are grey. They might have switched them for n/a injectors when i bought the engine

thanks
-Jose[/b][/code]

what are the biggest injectors available for ej22t motor?
where can i buy them? how much do they cost?

thanks
-Jose

let me guess, having the coolant sniffed is to take it to some one that will survey it to see if it has carbon monoxide or something?????
. hope you figure it out man.

Submannz The engine in question is a 2.2 Subielyc does not grind the cams. they machine the head so that the cams get closer to the valve, creating more lift. Weld up cams are not to good i heard because they dont last especially with tighter springs. The factory makes the lifters and the cams out o...

To Mark R. Mark that is interesting about the piston protrusion. What you said got me thinking, you know how forged pistons have to run bigger cyl. wall to piston clearance cause they expand more right? Well, would you think that duplicate OEM dimension JE pistons would hit the cyl. head with the th...

Josh thanks for the e-mail. -K- thanks. primitive racing are the ones who recommended pantera specialties to me. Do a Google search on paeco and find some threads that i read, lets just say i wont be using their services. They told me at Cobb Tunning that fully ported 2.2 heads flow the same as 2.5 ...

-Josh

what's Rod's email so i can pm him? im sure you know what will happen if i do a search on "Rod" or "Subie"

Aaron

can you refer me to any shop that has done these heads before?forget about cobb they dont do pesky little 2.2 heads. i was on the phone with them a while back and they just tried to sell me their 2.5 heads and stuff. i was also reffered to pantera specialties in cali. have you heard of them?

Josh Cams? where can i get these cams? i was'nt aware they existed. Are they weld up's? the only thing ive ever heard of cams for the 2.2 is from subylyc they prep 2.2's for aircraft. they remachine the cam bearing journals so that the cam sits closer to the folower thus creating more lift, but the ...

Hello there. im in the midst of putting toghether a new EJ22T shortblock i purchased. 400 flywheel hp is my goal. can this be done with the stock 2.2 turbo heads and cams? the reason i ask is because i have doubts and was thinking of using 2.5 heads that flow better. So far this is what i got: -NEW ...