legacycentral bbs

So i bought a flywheel from this guy with a turbo gc8, he told me that he made 371awhp on stock injectors. He said that on a stock top feed they flow around 800cc if you lightly grind the nozzle till the atomizer head on the tip of the injector comes out. The shower head outlet looking thing that ma...

the flywheel i remember it just had normal wear. not blue hot spots or anything. I didnt even noticed any raised lip beyond the 8-7/8" contact area.. but i think it might be kinda concave shaped so its grabbing a bit on the 1/8" edges.

its a comp 6 puck clutch so it has a lot more bite.

well you guys helped me solve my problem with my clutch not dissengaging... 9" 02-05 wrx clutch mated to a 92 ss flywheel meant for a 8-7/8" clutch. What a FAIL :oops: As of right now i have dumped over 3 grand into the car, and am sick and tired of buying big ticket items for it. So the b...

yes with a wrx flywheel, paired with a wrx clutch

comp clutch 6 puck sprung 02-05 clutch. and no i didnt have it machined... just lightly honed. \

well i swap it out with a wrx clutch and hope to god that fixes it

shoot... would i have to swap over the clutch fork to from a 02-05 wrx?

shoot i did mix n match i kept the stock 92 ss flywheel... would that be the issue?

so its been 3 months since ive swapped out a tranny and a clutch in my 92 ss, and i still cant get the clutch to fully disengage... so far i have: replaced the clutch master (was properly bench bleed) replaced the slave cyl bypassed the clutch dampener with a straight brake hose from the master to t...

damn i just special ordered a ss clutch master cyl, but if i changed just the slave cyl to a wrx one will it make a difference? as for the throw out bearing i was under the impression that it locks against the ring on the female end of the release bearing that is premanantly attached to the pressure...

ya i know what you mean by staying in contact, just like how calipers run at zero clearance. And yes the rod does stay snug against it, but you can push the slave back a bit after its released. Its like the slave cylinder is taking up to much slack, so the travel of the piston is reduced making the ...

So i am still having problems getting the clutch to fully disengage on my 92 ss. heres the run down: i bought it in the summer with a blown tranny and a torn release bearing, so the clutch never work. The previous owner said the clutch stopped working one day, he said there was a round spacer/bushin...

yes the clutch damper i want to bypass. my co worker is convinced i have air in the system. ill replace the line and bypass it and bleed it nicely and see if it helps. i really hope it has nothing to do with the clutch being for a 02-05 wrx I really dont wanna take the tranny out again. I just repla...

sorry for the dumb question but, im clutch master line right off the beggining from the clutch master cylinder to the (slave i guess?) on the side of the transmission (not the one pushing the clutch fork) is kinda leaky. I found out that line is $70 or so. But there is a shop locally that makes any ...

leave the wastegate actuator linkage on without hooking up a vacuum source or tack weld where the lever hinge pivots in a closed position. When you want to sell it just break the weld off or grind it. Would it be silly to just use some mechanic's wire or a nice heavy spring and fasten the wastegate ...

can i use sr20det 850cc sard side feed injectors with 92-94 n/a rails?

also i want to use it with a microtech lt10s, does any one know where i can get a base map for it? would a eg20t basemap be close enough to start with?

Wait, watch out -- the 02 WRX transmission has a 1.1:1 output ratio between the front and rear (or the other way around, I forget). In any case, it's meant to work with a 3.545 rear differential. damnit this is never ending for me trying to match up fd's ya you're right i just looked it up on allda...

ya scrap that stupid idea. I found a 02 wrx tranny locally and its 3.90 fd yay!

600 bones though

so my ss tranny is hooped. There is next to nothing availible for ss 5 speeds. I have looked at 02-05 wrx tranny's but i heard they are "glass trannys" So i was wondering are jdm 90's wrx trannys any stronger? I'm looking to buy this one. he says is a version 2 wrx tranny, anyone care to f...

pm'd sir!

hey guys i picked up a td06 20g and i test fitted it onto the up pipe, and man the spacing is freakin tight on the intake! I tried search "tid" or turbo inlet duct on the intake forum but only came up with the coffe cup mod thread. Does anyone know any place that makes an intake elbow that...

1st and 2nd syncro is toast on mine. so im looking for another 5 speed tranny just has to work and not grind or make loud howling noises.

please help me out guys!

thanks

pm'd

could you define "up north"? like close to the border or in vancouver?

Both are marked as "no marking" for a 92 ss. $30 for one $50 for both. I ordered them because i thought my 1-2 fork was broken, but turns out my 1st and 2nd syncros are hooped located in vancouver bc. will ship anywhere. shouldnt be more than 10bucks to the states. I paid over $50 each for...

i have an 98 n/a 2.2 wagon is it possible to use that tranny? i am aware that the clutch is a push cable opperated system.

but will it hold 300+ft lbs of torque?