Sti Front and Rear Swaybars fit?

livestrong14 · Post by **livestrong14** » Sat Jul 22, 2006 2:21 pm

Hey again guys,

Do stock STi front and rear sway bars fit on a 91' legacy turbo? I have heard that the rear sway requires a little modding to the spare tire area. I have also heard that the front sway is a direct bolt on. Does anybody know for sure? I think Kelly is using this setup.

Thanks,
-Devan

livestrong14 · Post by **livestrong14** » Wed Jul 26, 2006 7:24 pm

Is there anybody out there that knows? I would really like to find out by this week.

Thanks,
-Devan

Post by **Legacy777** » Thu Jul 27, 2006 2:19 am

The front will probably be a tad wider, but can probably be made to work.

The rear....I don't know.

livestrong14 · Post by **livestrong14** » Thu Jul 27, 2006 11:52 pm

does anybody know someone that has already done this? I could PM them and get the whole scoop.

Imprezive · Post by **Imprezive** » Fri Jul 28, 2006 2:18 am

I doubt the rear will fit without modification. As for the front I dont know, have you tried searching?

livestrong14 · Post by **livestrong14** » Fri Jul 28, 2006 5:37 am

yea, I've searched quite a bit.

jamal · Post by **jamal** » Fri Jul 28, 2006 9:15 pm

As far as I know they don't. Hardy (THAWA) has various STi suspension parts, as has psyber_0ptix on nasioc. You should try a search on nasioc and include their names.

Kelly · Post by **Kelly** » Tue Aug 01, 2006 3:57 am

I replied to your PM Devan.
Now that I think about it, I think there both the same size, only a bit wider and will rub your tires if your running a 225 in the rear. Its kinda been a while since I actually got under my car.

Imprezive · Post by **Imprezive** » Tue Aug 01, 2006 5:42 am

I think I remember a guy installing a wrx rear bar and it was super close to the tires, aside from that he had to cut that bump off the bottom of the spare tire holder. I'm going to work on making sway bar mounts to enable the use of wrx/ipreza bars without modification

livestrong14 · Post by **livestrong14** » Tue Aug 01, 2006 7:24 am

rallitektech wrote:I replied to your PM Devan.
Now that I think about it, I think there both the same size, only a bit wider and will rub your tires if your running a 225 in the rear. Its kinda been a while since I actually got under my car.

Thanks kelly! I just replied to your PM. I'll stop by the shop as soon as we get finished up. Take care

Adam West · Post by **Adam West** » Wed Sep 06, 2006 9:37 pm

Reserrecting this...What about the FRONT swaybar? Will the STI bar fit?

The reason I'm asking is that Teagues sells a monster 27mm adjustable Whiteline "Racing" front sway bar for STI's...thinking it might be nice to get...

VRoman · Post by **VRoman** » Mon Sep 11, 2006 5:44 am

Does anyone know if a WRX front sway bar fits a 94 Legacy? I am trying to find an adjustable 24mm sway bar, but it seems like no one makes them any bigger than 22 for an older Legacy like mine.

entirelyturbo · Post by **entirelyturbo** » Mon Sep 11, 2006 9:31 pm

You can use a WRX/STi front bar if you use the WRX/STi front control arms.

Not only is the front track wider on the WRX/STi, but the front swaybar mounts differently than ours does.

Oh, and if you use WRX/STi front control arms, you have to change the front bushing. The WRX/STi bushing won't fit in our crossmember.

n2x4 · Post by **n2x4** » Mon Sep 11, 2006 9:45 pm

I thought all the control arms were the same? When I replaced my broken one with one from a junkyard they gave me a control arm from a 97 legacy and it fit fine.

entirelyturbo · Post by **entirelyturbo** » Thu Sep 14, 2006 8:00 pm

A 97 Legacy one will fit. The part number for ALL 1st and 2nd gen Legacies, 90-99, are all the same.

But the newer cars are different.

legacycentral bbs

A forum for 89-94 BC-BF(BJ) Legacy Owners and Fans

Sti Front and Rear Swaybars fit?

Sti Front and Rear Swaybars fit?