Bushings
Moderators: Helpinators, Moderators
-
- Second Gear
- Posts: 296
- Joined: Sat Mar 06, 2010 12:06 pm
- Location: Yucaipa, Ca
Bushings
where is a good place to find Transmission Cross Member Bushings, and Differential Bushings online for a good price I can't seem to find any!
1992 Legacy L (AWD )(5MT)[2.5RS Trans] EJ22T Swap in Progress
-
- Third Gear
- Posts: 698
- Joined: Wed Mar 02, 2005 4:36 am
- Location: vancouver/pdx
Re: Bushings
turn in concepts
1994 SS "JDM-OEM"
1997 2.5gt wagon, ricebowl, 207 swapped
1999 lifted 2.5gt wagon,"tokyo weekender"
1994 gt wagon, next build
1994 turbo wagon
1997 2.5gt wagon, ricebowl, 207 swapped
1999 lifted 2.5gt wagon,"tokyo weekender"
1994 gt wagon, next build
1994 turbo wagon
-
- Second Gear
- Posts: 296
- Joined: Sat Mar 06, 2010 12:06 pm
- Location: Yucaipa, Ca
-
- Second Gear
- Posts: 296
- Joined: Sat Mar 06, 2010 12:06 pm
- Location: Yucaipa, Ca
Re: Bushings
Is there a place that I can get some Stiffer bushings for the diff?
1992 Legacy L (AWD )(5MT)[2.5RS Trans] EJ22T Swap in Progress
Re: Bushings
I think you can probably get some from TiC, kartboy, whiteline, or superpro.
Not all of them may have one, but one of them probably has it. Our diffs use a bracket and the bracket has metal collared bushings. They are a pain to remove! If you can find replacement bushings, hopefully they are just poly bushings you can install by hand.
If all you can find is the hardened rubber STi/group N bushings, I wouldn't bother. That's kind of why I didn't replace my rear diff bushing a couple years back. All I could readily get was the STi bushings, and they are a living pain in the arse to replace.
Not all of them may have one, but one of them probably has it. Our diffs use a bracket and the bracket has metal collared bushings. They are a pain to remove! If you can find replacement bushings, hopefully they are just poly bushings you can install by hand.
If all you can find is the hardened rubber STi/group N bushings, I wouldn't bother. That's kind of why I didn't replace my rear diff bushing a couple years back. All I could readily get was the STi bushings, and they are a living pain in the arse to replace.
Josh
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
-
- Second Gear
- Posts: 296
- Joined: Sat Mar 06, 2010 12:06 pm
- Location: Yucaipa, Ca
Re: Bushings
I bought some Kartboy outrigger Bushings thinking they would fit when I did my swap, but the top Bushings didn't work so I still haven't put them on. I bought them from TIC
1992 Legacy L (AWD )(5MT)[2.5RS Trans] EJ22T Swap in Progress
Re: Bushings
The kartboy outrigger bushings should work. I've got them on my Legacy. They are kind of confusing on how to install though.
Josh
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
-
- Second Gear
- Posts: 296
- Joined: Sat Mar 06, 2010 12:06 pm
- Location: Yucaipa, Ca
Re: Bushings
The smaller ones work but I cant figure out the larger ones!
1992 Legacy L (AWD )(5MT)[2.5RS Trans] EJ22T Swap in Progress
Re: Bushings
They just go between the body and outrigger.....they just kind of sit there.
This is assuming they're anything like the whiteline outrigger bushings.
Any chance you could snap some pics?
This is assuming they're anything like the whiteline outrigger bushings.
Any chance you could snap some pics?
Josh
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm