Bushings

Flywheel, Clutch, Transmission, Axles, etc...

Moderators: Helpinators, Moderators

Post Reply
SubyFusion
Second Gear
Posts: 296
Joined: Sat Mar 06, 2010 12:06 pm
Location: Yucaipa, Ca

Bushings

Post by SubyFusion »

where is a good place to find Transmission Cross Member Bushings, and Differential Bushings online for a good price I can't seem to find any!
1992 Legacy L (AWD )(5MT)[2.5RS Trans] EJ22T Swap in Progress
subaru_styles
Third Gear
Posts: 698
Joined: Wed Mar 02, 2005 4:36 am
Location: vancouver/pdx

Re: Bushings

Post by subaru_styles »

turn in concepts
1994 SS "JDM-OEM"

1997 2.5gt wagon, ricebowl, 207 swapped

1999 lifted 2.5gt wagon,"tokyo weekender"

1994 gt wagon, next build

1994 turbo wagon
SubyFusion
Second Gear
Posts: 296
Joined: Sat Mar 06, 2010 12:06 pm
Location: Yucaipa, Ca

Re: Bushings

Post by SubyFusion »

Thanks subaru styles :D
1992 Legacy L (AWD )(5MT)[2.5RS Trans] EJ22T Swap in Progress
SubyFusion
Second Gear
Posts: 296
Joined: Sat Mar 06, 2010 12:06 pm
Location: Yucaipa, Ca

Re: Bushings

Post by SubyFusion »

Is there a place that I can get some Stiffer bushings for the diff?
1992 Legacy L (AWD )(5MT)[2.5RS Trans] EJ22T Swap in Progress
Legacy777
Site Admin
Site Admin
Posts: 27931
Joined: Tue Oct 15, 2002 11:37 am
Location: Houston, Tx
Contact:

Re: Bushings

Post by Legacy777 »

I think you can probably get some from TiC, kartboy, whiteline, or superpro.

Not all of them may have one, but one of them probably has it. Our diffs use a bracket and the bracket has metal collared bushings. They are a pain to remove! If you can find replacement bushings, hopefully they are just poly bushings you can install by hand.

If all you can find is the hardened rubber STi/group N bushings, I wouldn't bother. That's kind of why I didn't replace my rear diff bushing a couple years back. All I could readily get was the STi bushings, and they are a living pain in the arse to replace.
Josh

surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT

If you need to get a hold of me please email me rather then pm
SubyFusion
Second Gear
Posts: 296
Joined: Sat Mar 06, 2010 12:06 pm
Location: Yucaipa, Ca

Re: Bushings

Post by SubyFusion »

I bought some Kartboy outrigger Bushings thinking they would fit when I did my swap, but the top Bushings didn't work so I still haven't put them on. I bought them from TIC
1992 Legacy L (AWD )(5MT)[2.5RS Trans] EJ22T Swap in Progress
Legacy777
Site Admin
Site Admin
Posts: 27931
Joined: Tue Oct 15, 2002 11:37 am
Location: Houston, Tx
Contact:

Re: Bushings

Post by Legacy777 »

The kartboy outrigger bushings should work. I've got them on my Legacy. They are kind of confusing on how to install though.
Josh

surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT

If you need to get a hold of me please email me rather then pm
SubyFusion
Second Gear
Posts: 296
Joined: Sat Mar 06, 2010 12:06 pm
Location: Yucaipa, Ca

Re: Bushings

Post by SubyFusion »

The smaller ones work but I cant figure out the larger ones!
1992 Legacy L (AWD )(5MT)[2.5RS Trans] EJ22T Swap in Progress
Legacy777
Site Admin
Site Admin
Posts: 27931
Joined: Tue Oct 15, 2002 11:37 am
Location: Houston, Tx
Contact:

Re: Bushings

Post by Legacy777 »

They just go between the body and outrigger.....they just kind of sit there.

This is assuming they're anything like the whiteline outrigger bushings.

Any chance you could snap some pics?
Josh

surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT

If you need to get a hold of me please email me rather then pm
Post Reply