What did you do to your Subie today?

dillonr92 · Post by **dillonr92** » Fri Apr 19, 2013 10:32 pm

And im going to look in chapter 6 after work like it says and ill have more info

dillonr92 · Post by **dillonr92** » Fri Apr 19, 2013 11:34 pm

I also found this..the order of operation for testing code 41 is some were towrds the middle of thos thread.... http://bbs.legacycentral.org/viewtopic.php?f=2&t=47744

Look in there might give some insight for other problems as well.

CAV3MAN227 · Post by **CAV3MAN227** » Sat Apr 20, 2013 12:02 am

-Thanks for all your help dillonr92. This is really helping me. If you have anymore info on this, PM me or I'll PM you. We should get this thread back on topic.

-Joe

dillonr92 · Post by **dillonr92** » Sat Apr 20, 2013 12:18 am

No problem. I stand at a cnc machine all day with nothing todo but load and unload parts. So i spend a lot of time on the bbs..... And yes we should.. i am hopfully getting some new 17s tonight to throw on my subie. Also got a diamomd coil pack and a jecs MAF....

fngearhead · Post by **fngearhead** » Sat Apr 20, 2013 12:42 am

I cursed at mine because I can't seem to keep my greytop injectors from sticking.

dillonr92 · Post by **dillonr92** » Sat Apr 20, 2013 5:02 pm

Got some 17s lastnight. Spun my springs back.. Some one had my front end apart and had the springs spun so the bottom end of the spring didnt set in the bottom hats notch for the spring.... Confusing unless you seen it.... But fixed hopfully.. .... I cleaned more shit under the hood. Srill tryin to figure out y my BCS area is clicking.rapidly also my accel prob. .... Also ran into this........after i got my rims last night the kid text me saying he wamted my turbo rims.......read the rest i copied and pasted my post in wheels and tires section...... Turbo rims in good condition..... Im tryin to decide if i want to keep my stock rims as they are not in abundance and mine are Fuxkn clean..i have17s on. So these are extra.. This kid wants to trade me 3" wrx exhaust For them but he also wants my brand new 2.5" strait piped magnaflow to go back on his car ... I dont feel its worth it maybe if he had his own exhaust to go back on his car.. ... Also another thing is hes got some 18" 5zigs... Why dose he want my stock rims so bad? Should i hold on to them? I feel the rims are almost more rare than the car?? Help?

Post by **Legacy777** » Sun Apr 21, 2013 12:20 am

I finally finished my hybrid UK gauge cluster today. I got the odometer adjusted and everything's ready to go with it. I need to redo some of the wiring in the dash, and then it'll be ready to go back in the car.

More info, pics, & video can be found here:
http://bbs.legacycentral.org/viewtopic. ... 50#p405150

nosyt · Post by **nosyt** » Sun Apr 21, 2013 5:15 am

took my Ver8 equal length twin scroll header from this

to this...

and finally to this

still unsure if i should delete that cat though....

cj91legss · Post by **cj91legss** » Sun Apr 21, 2013 5:30 am

I think you should... That way it doesnt break down and go in your turbo..

Sent from my SGH-T989 using Tapatalk 2

cj91legss · Post by **cj91legss** » Sun Apr 21, 2013 5:32 am

Now that i took a closer look, i dont see a cat in there... What spot are you referring to?

Sent from my SGH-T989 using Tapatalk 2

nosyt · Post by **nosyt** » Sun Apr 21, 2013 6:02 am

was making a joke about the kitty cat in the photo...

rallyak · Post by **rallyak** » Sun Apr 21, 2013 7:54 am

The one with the tail and fur.

cj91legss · Post by **cj91legss** » Sun Apr 21, 2013 4:00 pm

Hah, What i looked at that last pic on tapatalk last night I couldn't even tell that was a cat... I actually thought it was old exhaust shields. Small picture got the best of me...

Post by **Legacy777** » Sun Apr 21, 2013 4:17 pm

Good joke about the cat

cj91legss · Post by **cj91legss** » Sun Apr 21, 2013 4:21 pm

Indeed, put me on the Blonde side for sure.

Someperson · Post by **Someperson** » Sun Apr 21, 2013 4:49 pm

Got the beast started yesterday and the HGs blew out within 2 mins of me getting it running... FML! Any suggestions on brand/ mat'l for hg? Oem p#/ price?

sqc151 · Post by **sqc151** » Sun Apr 21, 2013 5:31 pm

always use OEM gaskets.

Someperson · Post by **Someperson** » Sun Apr 21, 2013 5:38 pm

Well i was considering doing a metal hg

mike-tracy · Post by **mike-tracy** » Sun Apr 21, 2013 6:57 pm

If you do a metal head gasket, you should have your head and block surfaces machined, as the metal HG's aren't too tolerant in surface imperfections.

dillonr92 · Post by **dillonr92** » Sun Apr 21, 2013 7:05 pm

Agreed...as a machinist the surface finiish on the matal HGs will not be to a specific tolerance one side may be a thousandth diffetence then you have a leak because you got you heads machined and there granet top flat. The best bet is subaru ordered oem HGs.

Someperson · Post by **Someperson** » Sun Apr 21, 2013 8:04 pm

I am a machinist myself, i would be surface grinding them myself after i received them because i do not trust their QC departments lol

Someperson · Post by **Someperson** » Sun Apr 21, 2013 8:05 pm

And i would run a nice big oil stone over the head and block surfaces

dillonr92 · Post by **dillonr92** » Sun Apr 21, 2013 8:18 pm

Deffinatly camt go wrong with doing your own finish ive been working on a cnc latly and not to impressed with how much sanding and deburring i have to do. I make fly reels so they need to be diamonds. As they are $1100+ (saracione fly reels).

Someperson · Post by **Someperson** » Sun Apr 21, 2013 9:39 pm

current job (and past jobs) is Proto-trak work was doing stuff on mazaks a bit before but i'm making stuff for milk testing and production machines. was making hull penetrators for the virginia class subs at one point... sonar arrays and bose speaker parts. unimpressed with the quality of parts i'm getting lately...

randomiam · Post by **randomiam** » Mon Apr 22, 2013 3:45 am

OEM gascap installed, went through and checked fuel lines.. engine bay to fuel pump access cover; We found a wet spot near my tank

Its at its worst when its a full tank of gas.. Draining tank, really hope I don't have to drop the gas tank.

New wipers

legacycentral bbs

A forum for 89-94 BC-BF(BJ) Legacy Owners and Fans

What did you do to your Subie today?

Re: What did you do to your Subie today?

Re: What did you do to your Subie today?

Re: What did you do to your Subie today?

Re: What did you do to your Subie today?

Re: What did you do to your Subie today?

Re: What did you do to your Subie today?

Re: What did you do to your Subie today?

Re: What did you do to your Subie today?

Re: What did you do to your Subie today?

Re: What did you do to your Subie today?

Re: What did you do to your Subie today?

Re: What did you do to your Subie today?

Re: What did you do to your Subie today?

Re: What did you do to your Subie today?

Re: What did you do to your Subie today?

Re: What did you do to your Subie today?

Re: What did you do to your Subie today?

Re: What did you do to your Subie today?

Re: What did you do to your Subie today?

Re: What did you do to your Subie today?

Re: What did you do to your Subie today?

Re: What did you do to your Subie today?

Re: What did you do to your Subie today?

Re: What did you do to your Subie today?

Re: What did you do to your Subie today?