legacycentral bbs

hey guys i emailed subaru about the production numbers for the 91-94 legacy turbos and this was the reply i got: Dear Mr. Watson: Thank you for visiting the Subaru Web site and for your request. By Legacy SS, I assume SS stands for Sport Sedan. I was not here in those years and do not know if that i...

the timing belt is very easy to do wrong if someone has never done one before. there are arrows on the pulleys that most people think are the timing marks but really the timing marks are just tiny notches. the first time i did my timing belt i used the arrows and it did not start. i took it off, did...

thats nice i like that alot. did you weld those bungs on yourself?

do the aluminum one in the fender. looks better plus colder air=more hp

i got an catless dp off ebay for like 100 and cut the bung out of my old dp and welded it into the ebay one. cheap and easy

as soon as i get my tax return which will be in a day or two im gonna order a competition clutch kit from maperformance.com. they are 375 which is cheap compared to act clutch at 575

i have the h&r and gr-2 combo on my car and it is nice but the agxs would be better because they are stiffer than the gr-2s and the h&r springs have a fairly high compression rate so they should have a stiffer strut

thanks thats what i figured. i just thought i would notice it more in lower gears. i only notice it in 4th and 5th

ok so im driving on the interstate and i punch the gas and the rpms go up way faster than i accelerate. this has to be a worn out clutch right? i dont notice it slipping at lower speeds

like i said take a look at your rear springs and see if they are tapered

well if your doing just springs no. you will need the 04+ front top mounts. if you go for the 04+ coil overs then im pretty sure they will bolt up no problems, no mods

if you want prodrive springs, or coil overs for that matter, you need to get 04+

im not getting a spark but i am getting power to the ignition fuse which is fine and i am getting power to the coil pack. so it must be that the coil pack. or would a bad camshaft or crankshaft sensor cause no spark?

just look up in the rear wheel well or jack up the back end to get a better look at your springs. if they are smaller at the top than the bottom they are tapered

no i haven't

the only thing is i am not 100% sure the fwd models have tapered rear springs. i think they do just like the awd models. check to see if they are tapered at the top. if they are NOT and they are straight, then the h&r springs will fit without modification

you need the rear top mounts from a 92-94 which come in three pieces: strut mount, spring seat, and rubber seat. the parts numbers are 20370AA200, 20373AA200, and 20375AA030. I just finished mine yesterday. Finally!! It was a huge pain in the ass because i didn't know all this information when i bou...

About four months ago my water pump went out. I put a new one in and replaced the fuel filter, pcv valve, and plug cables. It has been on blocks for months because I put a new suspension in and didn't receive all my parts until a couple days ago. Yesterday I finally got the chance to start it up but...

no the 90's have the same rear suspension as my 91. I have the top mounts i need now and have one side on now. im doing the other side tomorrow. the only problem im having now is tightening the jesus nut without spinning the stut piston

so im still looking for rear top mounts from a 92-94 and im not having much luck. none of the junk yard/parts places have them and im not sure if the ones on the internet come with spring perches. do the 95-99 sedans have the same bolt pattern as 90-94? i tried one from a wagon and the bolt pattern ...

cool i know a guy who has a million subarus and parts so ill see if i can get some from him. Those damn springs were on back order for 8 weeks i cant wait to be done with it test them out!

Im using kyb gr-2s but maybe the front is ok this is the first aftermarket spring ive put on the car and i just didnt expect it to lower it so much especially since kybs tend to raise the front end a bit. I dont know what im going to do about the back though because right now i cant install them the...

29868. i called about the rear springs being different for different years and told them the 90 and 91s have tapered rear springs whereas the the other years are not and all they told me is that they fit most applications. bullshit h&r sucks balls

Has anyone actually used the h&r sport springs? H&R claims these springs fit legacy sedans 90-98 but the springs for 90-98 are not the same. 90 and 91 have tapered springs. I bought some for my 91 ss and installed the front springs along with brand new kyb gr-2 struts today. When i lowered i...

I just recently bought a wrx downpipe off ebay for my 91 22t and it has no o2 sensor bung whatsoever. so i installed it an just unplugged the o2 sensor and ive been driving like that for a few weeks. it seems to be having no problems and only trips the cel wen i get on the interstate and am at high ...